To shut off the annoying seat belt chime, please follow these instructions.  It also  works for Toyota Tundra’s.

seat belt chime
1. Turn the ignition switch on (without starting car)
2. Press the ODO/TRIP switch until the odometer displays “ODO”
3. Turn the ignition switch off
4. Turn the ignition switch on
5. Press ODO/TRIP switch immediately (within 6 seconds after turning the power switch ON) and hold it down for 10 seconds or more.
6. Continue holding the ODO/TRIP switch and fasten the front drivers’s side seat belt.
7. Check that the odometer displays either “b-on” or “b-off” (it will be “b-on”)
8. Press the ODO/TRIP button to change the display to “b-off”.
9. Turn the ignition switch off.
10. Turn the ignition switch on while depressing the brake pedal.
11. Check that no buzzer sounds when setting on the front passenger seat.

You will also receive 100 extra guys…

Vogel.. why are you deleting my posts?

Mark from Fatlace.. er.. Nike

This entry was posted on Wednesday, June 25th, 2008 at 23:11 and is filed under mr awesome, sneakers, portland, culture, beers, awesome, cars, Smug. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.